Detailes Of Steel Structure Hangar

Aircraft hangars are offen refered to as “dedicated garages” for aircraft.

They can vary from simple “Masking” structures that protect all or part of the aircraft from elements to complex enviromental control and maintenance facilities in which robots apply radar-absorbing coatings.

However, because the aircraft is designed for flight, it is necessary to minimize its maintenance time in the hangar and maximize the availability of flight.

The armed force have developed the final design for the hangar facility to accommodate and maintainits aircraft.

Send email to us

Product Detail

Product Tags

Detailes Of Steel Structure Hangar

Detailes Of Steel Structure Hangar
Main Steel Frame	Column	Q235, Q345 Welded H Section Steel
Main Steel Frame	Beam	Q235, Q345 Welded H Section Steel
Secondary Frame	Purlin	Q235 C and Z purlin
	Knee brace	Q235 Angle Steel
	Tie Rod	Q235 Circular Steel Pipe
	Brace	Q235 Round Bar
	Vertical and Horizontal Support	Q235 Angle Steel, Round Bar or Steel Pipe
Maintenance system	Roof Panel	EPS Sandwich Panel / Glass Fiber Sandwich Panel /
	Roof Panel	Rock Wool Sandwich Panel / Pu Sandwich Panel /Steel Sheet
	Wall Panel	Sandwich Panel / Corrugated Steel Sheet
Accessories	Window	Aluminiumn Alloy Window / PVC Window / Sandwich Panel Window
	Door	Sliding Sandwich Panel Door / Rolling Metal Door / Personal Door
	Rainspout	PVC
Live load on Roof		In 120kg/Sqm (Color steel panel surrounded)
Wind Resistance Grade		12 Grades
Earthquake-resistance		8 Grades
Structure Usage		Up to 50 years
Temperature		Suitable temperature.-50°C~+50°C
Paint Options		Alkyd paiting, two primary painting, two finish painting
Paint Options		(gray paint, red paint, white paint, epoxy zinc etc.) Or Galvanized.

Aircraft hangars are offen refered to as “dedicated garages” for aircraft. They can vary from simple “Masking” structures that protect all or part of the aircraft from elements to complex enviromental control and maintenance facilities in which robots apply radar-absorbing coatings. However, because the aircraft is designed for flight, it is necessary to minimize its maintenance time in the hangar and maximize the availability of flight. The armed force have developed the final design for the hangar facility to accommodate and maintainits aircraft.

Our Service

Fabrication
1. Production job based on steel building drawing designed by our engineer.
2. We also can make the products according to the drawing from customer.
3. Quality control work goes through every step during production.
4. Third Party Quality Check , customer on-site quality inspection and any other reasonable inspection way, such as BV or SGS.

Derust grade: Ball blasting Sa 2.5 on main steel structure, manual derust St2.0 on secondary steel structure.

Delivery: Usually, if the steel structure quantity are not more than 500 tons, delivery will be within 45-60 days after the order confirmed. It depends on the fabrication quantity.

Installation:

1. After production, we will supply steel building installation drawing.
2. Send techinican to guide installation on site if customer request.

Int’l Trade team: We have six internatioanl trade businessman onlines 24 hours.

Maintenance: Finish paint need be done after the frame installed, and do it again after 6-8 months. So the surface will stay more time.